A standard 3-6ft tall 2×4 board (not included) is required to complete this assembly. Brand new inexpensive construction lumber works the best. 1. Unpackage 2×4 tube, four legs and two 3/8 carriage bolts with wingnuts. Pic (1) 2. Over lap legs on each side so bolt holes in legs and the 2×4 tube line up.…

1. Insert carriage bolt into target front to back.Install washer over bolt on backside of target. Pic (1) 2. Install ½” regular nut leaving room between target and washer for room for mount. Tighten until the target barely touches the very top edge of the mount so target can move. Pic (2) 3. Install Target Lok. 4. Install ½”…

A standard metal fence t-post (not included) is required to complete this assembly. 1. Insert mount over the top of a standard t-post. 2. Ensure the bolts face the flat part of the t-post. 3. Tighten the two 5/16” bolts (included) until the mount is firm. 4. Install a ½ inch x 2″ carriage bolt and lock nut into…

A standard 3-6ft tall 2×4 wooden board (not included) is required to assemble your stand, in addition to the mount kit components. 1. Insert 2×4 mount over the top of a standard 2×4 board. It should fit snugly. (Pic 1) 2. Install a ½ inch x 2″ carriage bolt and lock nut into your target. 3. Tighten until…