T Post Hanger Assembly

T-Post Mount Kit Assembly

A standard metal fence t-post (not included) is required to complete this assembly.

1. Insert mount over the top of a standard t-post.

T-Post Assembly - Pic 1

2. Ensure the bolts face the flat part of the t-post.

3. Tighten the two 5/16” bolts (included) until the mount is firm.

T-Post Assembly - Pic 2

4. Install a ½ inch x 2″ carriage bolt and lock nut into your target.

5. Tighten until the target barely touches the very top edge of the mount so target can move as in picture. Do not over tighten. Target should move freely. Silhouettes should be 1 to 1 1/2 inches from t-post when properly mounted.

T-Post Assembly - Pic 3
Posted in

wpengine

This is the "wpengine" admin user that our staff uses to gain access to your admin area to provide support and troubleshooting. It can only be accessed by a button in our secure log that auto generates a password and dumps that password after the staff member has logged in. We have taken extreme measures to ensure that our own user is not going to be misused to harm any of our clients sites.