Horizontal 2×4 Steel Target Mount

Description

Horizontal Steel Target Mount for 2×4

Our horizontal steel target mounts use a common wood 2×4 while holding  your target at a 20-degree angle safely deflecting spent shrapnel to the ground below the target.  The open hook design of the 2×4 target mount allows you to quickly change your targets. Install the included grade 8 carriage bolt into your steel target with the lock nut and adjust so the target is properly angled.  As a result, the target can still move absorbing the energy of the shot while ringing like a bell. Add as many steel targets as you like to a horizontal 2×4 by simply sliding our steel target mounts into place.  (Targets Not Included)

Grade 8 hardware kit

Nothing can ruin your range time faster than a broken target system. That is why we use a included grade 8 carriage bolt to use with your steel target mounts. By using this design, the target can move which helps absorb the energy from your shot and provide a loud ring that will bring a smile to your face.

Steel Target Lok System

Never worry again about your AR500 targets bouncing off your steel target mounts with our optional Target Lok system . Works great for all targets, especially ones under 8 inches.  Simply flip the lok down so it wraps around the 2×4 mount and your target is locked on. Want to remove your target? Simply flip the target lok up and lift the target off.

Disclaimer

Buyer assumes all responsibility for the use and misuse of the purchased steel targets.